Swimming pool recommendations
Fiberglass inground pools
The evolution of fiberglass swimming pools has almost rendered old fashioned concrete or vinyl in-ground swimming pools obsolete, as fiberglass pools are more cost-effective, friendlier on the environment, and easier to install. If you consider the difference between walking on glass or sandpaper, and you will have an idea of the difference between the rough surface of a concrete pool compared to that of a smooth fiberglass pool. Fiberglass pools provide even surfaces that are kind to tender skin, while the uneven surfaces of concrete often leave cuts and scrapes and can easily catch and rip bathing suits. The chemical makeup of concrete promotes the growth of micro-organisms, and the grooves and divots in concrete are spots where bacteria and algae collect, leading to significant cleaning and maintenance costs. The maintenance expenses are quite steep with concrete pools, as one must scrub, clean and give them acid washes to safeguard the pool from the growth of bacteria. The typical image of concrete is one of strength, but the fact is that fiberglass is a lot stronger than conventional concrete, which has a tendency to crack when the ground around it contracts or swells due to the weather. Don’t look at the initial expense of a fiberglass pool in comparison to a concrete pool and conclude that concrete is cheaper, because the extra cost of fiberglass is made up for in savings on cleaning and maintenance. A concrete pool will often take weeks to install and require the use of environmentally hostile chemicals to maintain and keep clean, while a fiberglass pool only takes a few days to install and does not require those nasty chemical products to keep away even nastier bacteria.
Solar pool heaters
The end of summer does not indicate the end of enjoying in your family swimming pool, just as long as you install a solar pool heater you can bask in your pool well into the fall. There are four outstanding components to a solar powered pool heater including a pump, a filter, a diverter valve, and the solar collector installed on the roof through which the water is pumped, heated, and then pumped back into the pool. The bigger the solar collector the longer into the colder months you can enjoy your pool, so the collector should be anywhere from 50% to 100% the size of the surface of the pool. To reach the utmost results your solar collector requires placement where it receives the most sunlight, and you need a pump timer set to operate during the day. As soon as you have your pool water warmed up it would be a good idea to acquire a pool cover to hold in the heat, and to keep random junk and dirt from blowing into your pool. You can lay out as low as $2,000 and as high as $10,000 on a solar heating system, but average expenses run in the $3-4,000 range, comparable to old fashioned propane heaters or heat pumps, but without the on-going operational costs of traditional pool heaters. Because the only moving component part in a solar pool heating system is the diverter valve, which controls the water flow to the solar panels, solar systems require very low maintenance costs, unlike conventional pool heating systems. Since solar pool heaters use clean sunlight for energy, you will not be emitting pollutants as you would with a propane heaters.
The subject of swimming pool accessories is very broad and there can be a wide array of sites which address a specific topic. Here are a couple of suggestions which will be of assistance. Do you have questions concerning above ground swimming pool liners? If so, visiting Buy Above Ground Pool Liners will be helpful. Another source of support will be Buy Electric Pool Heaters which will provide information for electric pool heaters. A person can also find other articles relating to inground pool covers at Winter Inground Pool Covers.
Related posts:
Posted in Patio and Outside